Single Soap Cutter HDPE soap cutter wire soap loaf cutter adjustable stop wooden

Description

Soap cutters are made to order, no inventory is kept in my shop.
This is a wooden handcrafted single bar soap cutter to cut one soap bar at a time.
It has an adjustable stop to make different size bars from 0-2 inches.
Is made out of oak and birch.  The bed is made out of high density poly ethylene.
It is finished with 2 coats of polycrylic finish.
Has a single cutting wire that is tightened with a tuning pin,
there is a washer on the end of the wire to prevent the gold ball on the end of the wire from pulling into the wood when tightening the wire.
It is 14" long x 10 7/8 " wide x 8 3/8" high. The cutter bed is 3 1/2" wide where log of soap lays on.
It has 4 gripper pads on the bottom to prevent slipping on surface when using.  You sure don't want it to move on you!!
It will cut a loaf 5" x 5" by any length.  All you have to do is cut and keep pushing your log of soap to cut again.
This cutter is for cutting cold and hot processed soap that has not fully cured. CUTTER WILL NOT CUT MELT AND POUR SOAP.
The HDPE block you see in the picture is for laying the end of your soap log on, if your soap log is longer than the bed on the cutter. This way, when you cut your bars, the log of soap will not fall on the surface you are cutting on and dent your log of soap.
If you are a serious soaper, I do also have a 12 bar multi cutter that will cut 12 bars at a time. Please see my other listings.
Please be aware, if you are buying out of the country, you MAY be required to pay a custom fee on your end before receiving  your product. CUSTOM FEES are not included in this sale.